LG Washer / Dryer Error Codes and Resolutions

Explore the complete list of LG Washer and Dryer error codes, their meanings, and how to resolve common issues. Get expert troubleshooting tips for LG appliances and find trusted repair services in Bhubaneswar and Odisha.

LG washer and dryer models are equipped with a variety of error codes to help users quickly identify and resolve common issues. These codes typically appear on the display screen of the machine when a malfunction occurs, allowing you to troubleshoot effectively without needing a technician right away. Below is a list of common LG washer and dryer error codes and their corresponding resolutions.

LG Washer Error Codes

1. UE (Unbalanced Load)

Cause: The washer detects an unbalanced load, often due to a single heavy item like a blanket or towel.

Solution:

• Rearrange the clothes inside the drum to distribute the load evenly.

• If necessary, try running the spin cycle again with the load balanced.

• If the load continues to be unbalanced, remove some items and restart the wash.

2. OE (Drainage Error)

Cause: This error means that the washing machine cannot drain water properly, which could be due to a clogged drain hose, filter, or pump.

Solution:

• Check the drain hose for any kinks or blockages.

• Clean the pump filter (usually located near the bottom of the front panel).

• Inspect the drain pump for debris or obstruction.

3. FE (Overfilling or Water Overflow)

Cause: The washer has detected that the water level is higher than normal, which can be caused by a faulty water level sensor or water inlet valve.

Solution:

• Turn off the water supply and restart the cycle.

• Check for a faulty water level sensor or replace the inlet valve if the problem persists.

4. LE (Motor Lock or Error)

Cause: The washer detects a problem with the motor, such as a motor overload or a failure to engage.

Solution:

• Turn off the machine and unplug it for about 10 minutes to reset the system.

• Check the drum for any obstructions that may be blocking the motor.

• If the issue continues, you may need to call a technician to inspect the motor.

5. DE (Door Error)

Cause: The washer’s door is either not closed properly or there’s a problem with the door lock mechanism.

Solution:

• Check the door to make sure it’s fully closed.

• Inspect the door lock and latch for any visible damage.

• If the door seems fine, it may be necessary to replace the door lock mechanism.

6. dE (Door Open Error)

Cause: The door is either open or not properly locked during the washing cycle.

Solution:

• Ensure the door is securely closed.

• If the door still won’t close properly, check the door latch or lock mechanism for damage.

7. CL (Child Lock Activated)

Cause: The child lock feature has been activated, which prevents buttons from being pressed accidentally.

Solution:

• Hold down the “Child Lock” button for about 3-5 seconds to deactivate the lock.

• Refer to your user manual for the exact button sequence if necessary.

8. tE (Temperature Error)

Cause: The washer detects an issue with the water temperature sensor or heating element.

Solution:

• Check the water inlet valve to ensure it’s working correctly.

• Make sure the hot water supply is functioning.

• If the problem persists, you may need to replace the water temperature sensor or heating element.

9. 5E (Drain Error)

Cause: The washer has trouble draining water, which could be caused by a clogged filter or a blocked drain hose.

Solution:

• Clean the drain filter and remove any obstructions.

• Check the drain hose for clogs or kinks.

• If necessary, inspect the pump for damage or blockages.

10. AE (Communication Error)

Cause: The washer has trouble communicating between the main control board and other components, such as the motor or sensors.

Solution:

• Power off the machine, unplug it for 10-15 minutes, and restart.

• If the issue continues, you may need to reset the control board or have it replaced.

LG Dryer Error Codes

1. d80, d90, d95 (Ventilation Blockage)

Cause: These error codes indicate a blockage in the dryer’s vent system, leading to poor airflow and inefficient drying.

Solution:

• Clean the vent system, including the lint filter, vent hose, and external vent exhaust.

• Check for kinks or blockages in the vent hose.

• Ensure the external vent opening is not obstructed.

2. F1 (Thermistor Error)

Cause: This error means there’s a malfunction in the thermistor, which controls the temperature inside the dryer.

Solution:

• Check the thermistor for signs of damage.

• If damaged, the thermistor may need to be replaced by a technician.

3. F2 (Heater Circuit Error)

Cause: The F2 code is displayed when the heater circuit detects a malfunction, which could be caused by a damaged heating element or related components.

Solution:

• Inspect the heating element for signs of damage or wear.

• If damaged, the heating element will need to be replaced.

4. dE (Dryer Door Error)

Cause: The dryer door is either not closed properly or there’s an issue with the door switch.

Solution:

• Ensure that the door is securely closed.

• Check the door switch for damage. If it’s faulty, it may need to be replaced.

5. tE (Dryer Temperature Error)

Cause: This error code signals a problem with the temperature sensor, such as overheating or sensor malfunction.

Solution:

• Check the temperature sensor for damage.

• Ensure that the vent system is clean and not causing overheating.

• If the sensor is faulty, it may need to be replaced.

6. bE (Button Error)

Cause: The bE error occurs when there’s an issue with the buttons or the control board, such as stuck or unresponsive buttons.

Solution:

• Clean the control panel and buttons to ensure they are functioning correctly.

• Reset the dryer by turning it off and unplugging it for 5-10 minutes.

• If the issue persists, the control board may need to be inspected or replaced.

7. PF (Power Failure)

Cause: This code appears when there is a sudden power interruption during the cycle.

Solution:

• Check the power supply and circuit breaker.

• If the power was interrupted, simply restart the dryer once power is restored.

8. F9 (Moisture Sensor Error)

Cause: The dryer’s moisture sensor is not functioning properly, which can lead to incomplete drying cycles.

Solution:

• Clean the moisture sensor with a soft cloth to remove lint or buildup.

• If cleaning doesn’t help, the sensor may need to be replaced.

9. LO (Long Drying Time)

Cause: The dryer is not drying clothes effectively, usually due to a blocked vent or insufficient airflow.

Solution:

• Clean the lint filter and the vent system to ensure there are no blockages.

• Check the vent hose for clogs or kinks.

10. HE (Heating Error)

Cause: This error is related to the heating element and indicates that the dryer is unable to produce heat.

Solution:

• Inspect the heating element for any visible damage.

• If faulty, the heating element will need to be replaced.

LG washer, LG dryer, error codes, LG washer dryer issues, LG washing machine error codes, dryer error codes, washing machine troubleshooting, LG washer problems, LG dryer troubleshooting, washer not working, dryer not heating, LG dryer error, LG washer error solutions, LG laundry appliance issues, LG washer repair, LG dryer repair, washing machine maintenance, dryer fault codes, LG washer dryer diagnostic, washing machine not spinning, dryer not drying, Bhubaneswar LG appliance repair, Odisha LG washer service, LG washer dryer problems, Bhubaneswar washer repair, Odisha dryer service, LG appliance repair Bhubaneswar

Conclusion:

LG washer and dryer error codes are designed to help users quickly diagnose and troubleshoot common issues. While many of the problems can be fixed with simple maintenance, such as cleaning filters or ensuring proper airflow, more serious issues like motor failure, heating problems, or control board malfunctions may require the help of a technician. Regular cleaning and prompt attention to error codes will help maintain the efficiency and lifespan of your LG washer and dryer.